How to Install Butterfly Wefts:

(Note: You will need silicone-lined micro beads, a hair hook/loop tool, and extension pliers).

1. Section Your Hair: Part your hair horizontally where you want to place the weft (leave enough natural hair on top to cover the extension).
2. Position the Weft: Lay the Butterfly Weft flat against your sectioned hair. Do not pull it too tight against the scalp; leave a little breathing room.
3. Pull Hair Through: Using your hook tool, pull small sections of your natural hair through the pre-cut holes on the PU side of the weft.
4. Bead and Clamp: Thread a silicone-lined micro bead onto the natural hair you just pulled through. Push the bead close to the weft and clamp it down firmly with your pliers.
5. Fold and Blend: Once all holes are beaded, the invisible side of the weft will lay perfectly over the top, hiding the beads and giving a seamless finish.

How to Remove Butterfly Weft Hair Extensions

One of the biggest advantages of Coovip Hair’s Butterfly Wefts is the hassle-free, zero-damage removal process. Because there is no glue, tape, or sewing involved, removing them is incredibly quick and easy.

Tools You Will Need:

• Hair clips (to section your hair)
• Hair extension pliers
• A fine-tooth comb or detangling brush

Step-by-Step Removal Guide:

Step 1: Section Your Hair
Use your hair clips to pin up the top layers of your natural hair, completely exposing the row of the Butterfly Weft you want to remove.

Step 2: Expose the Micro-Beads
Gently lift the top "invisible" flap of the Butterfly Weft. This will reveal the row of flattened silicone-lined micro-beads that are securing the weft to your natural hair.

Step 3: Unclamp the Beads
Take your hair extension pliers and gently squeeze the sides (the narrow edges) of the flattened micro-bead. Applying pressure to the edges will cause the bead to pop open and return to its original round "O" shape. Note: Do not squeeze too hard to avoid damaging the bead or your natural hair.

Step 4: Slide the Beads Off
Once the bead is open and loose, simply slide it down and completely off your natural hair. Repeat this process for every bead along the entire weft.

Step 5: Remove the Weft
After all the beads have been removed, the Butterfly Weft will be completely loose. Gently slide the weft down, pulling your natural hair safely out of the pre-cut holes in the PU base.

Step 6: Comb and Detangle
Once the weft is removed, gently brush through your natural hair with a detangling brush or fine-tooth comb.
Pro Tip: It is completely normal to see a small amount of hair fall out during this step. This is just your natural daily shedding that was safely trapped inside the micro-beads while the extensions were installed.

Post-Removal Care:
Because our Butterfly Wefts are made of top-grade Raw and Virgin Remy human hair, you can reuse them multiple times! After removal, wash and condition the wefts, let them air dry, and store them safely until your next installation.

Køberudstilling

Forhøj dit brand med personlig tilpasset hårudvidelsesemballage fra COOVIP HAIR. Som en direkte producent leverer vi omkostningseffektive, højtkvalitets emballageløsninger, der afspejler din brands identitet.

Hvorfor vælge brugerdefineret emballage?

1. Brandgenkendelse: Skill dig ud på markedet med emballage, der præsenterer dit logo og dine brandfarver.

2. Produktsikring: Sørg for, at dine hårudvidelser forbliver tangelfri og i perfekt stand under transport.

3. Kundeoplevelse: Forbedr afviklingsoplevelsen og efterlad et varigt indtryk hos dine kunder.

Vores tilpasningsproces

Trin 1: Konsultation
Diskuter dine emballagebehov og præferencer med vores designteam.

Trin 2: Designforslag
Modtag et skræddersyet design udkast baseret på dine specifikationer.

Trin 3: Prøvegodkendelse
Gennemgå og godkend en fysisk eller digital prøve før masseproduktion.

Trin 4: Produktion
Vi fremstiller din brugerdefinerede emballage ved hjælp af højtkvalitetsmaterialer.

Trin 5: Levering
Nyd hurtig global forsendelse med leveringstider på mellem 3 og 5 dage.

Emballagevalgmuligheder

Kassestilarter: Rektangulære kasser, vinduesvisningskasser, hængesel-kasser, pudekasser, magnetlukkekasser.

Materialer: Økologisk kraftpap, stiv karton, corrugerede plader.

Overfladebehandling: Glans, mat, tryk i relief, dekoration i relief, folieprægning, UV-belægning.

Størrelser: Tilpasset til forskellige længder og volumener af hårudvidelser.

Kom i gang i dag

Klar til at skabe emballage, der virkelig repræsenterer dit brand? Kontakt os for at begynde tilpasningsprocessen.

Kontakt os